bathtubs

Care & Maintenance

Get $1500 Off

and transform your bathroom in as little as one day.*

Luxury Bath Care and Maintenance Instructions

Thanks to the unique materials in our products, heavy cleaning isn’t necessary. Unlike porcelain, which can discolor and erode over time from harsh chemicals and minerals, Luxury Bath products are built to last. Your bathroom will look as beautiful as it is now in decades to come.

General cleaning instructions:

The following cleaning instructions have been compiled for proper hassle-free maintenance.

For normal, everyday cleaning, Luxury Bath suggests the use of a mild soap and water with a soft wash cloth. Use of scouring pads or abrasive cleansers will dull the surface. Should you wish to use a product not listed below, test on a small area in the corner of the skirt before applying to the entire bathtub liner. Always review individual cleansers' instructions and always rinse thoroughly after cleaning.

View Care & Maintenance Instructions

Recommended Cleaners

  • BCI Eliminate

  • Microban 24

  • Formula 409

White vinegar and water may also be used to soften mineral deposits. 
Use ½ cup Clorox Bleach per gallon of water as a disinfectant.

Do Not Use*

Original Clean Shower, Clean Shower for Plastic Showers & Glass, Soft Scrub, Dow disinfectant cleaner, Dow Scrubbing Bubbles, Dawn dish soap, Scrub Free, Lysol disinfectant cleaner, acetone, Lestoil, ammonia, fingernail polish remover, aerosols, or scouring pads are not suited for cleaning your Luxury Bath products.

*Use of these chemicals will cause a dull surface and/or an easily recognizable chemical crack. This will void your product warranty.

There is no need to use abrasive cleaners, which dull the gloss over a period of years. In extreme cases where the recommended cleaners do not work, use a Chore Boy or 3M Sponge pad. Make sure you use only the ones recommended for Teflon or non-stick surfaces.

Drain Cleaner

Caution: liquid drain cleaners are recommended over powders and/or crystal; however, when using liquid drain cleaning agents, bail the standing water out of the bathtub and remove the drain plug. Use a funnel to prevent spills and apply the chemicals directly down the drain. Always make certain that chemicals do not come in contact with the acrylic surface. Use drain cleaners sparingly, so that they do not boil out and attack the acrylic surface.

If you have any questions about the care and maintenance of your new Luxury Bath products and accessories, contact us!